Indexing Plungers - index plunger|indexing plunger|Quick Release Pin|Ball lock pin

Full thread Indexing Plungers

MS1130 indexing pin is suitable for occasions requiring positioning operation. The threaded lever can be fitted on the pin without knob at the request of the customer so that the customer can select the knob on his own or connect directly with other operating mechanism of the machine. Feature application: MS1130-SS type indexing pin is suitable for applications requiring positioning operation. AISI303 stainless steel is corrosion resistant and can be used on all machinery and equipment under special hygienic, climatic and environmental conditions with a pin made of this material.

Coarse Tooth Indexing Plungers With Rest Position

Model MS2171-ST pin with fixed stop applies where positioning is required and where the pin head needs to be locked in retracted position MS2171-ST is a relatively inexpensive distribution system with a prominent advantage of compact size.Suitable for applications without high-precision indexing. Due to the compact size of the type MS2171-5T indexing pin, it is recommended that the maximum tightening torque listed in the table above be observed during assembly.

Cam action indexing plungers

MIni Indexing Plungers

Ring-pull Indexing Plungers

Thread body: Stainless steel AISI303 Pin head: AISI303 stainless steel, it is recommended to install in the hole with tolerance of + 0.03 / + 0.08 Lock nut: Stainless steel AISI304 Pull ring: Stainless steel AISI304 Standard model: A type with pull ring, no lock nut AK type with pull ring and lock nut (default) Feature application: MS2172-SS indexing pin is suitable for occasions requiring positioning operation. MS2172-SS is a relatively low-cost indexing pin series. Its outstanding advantage is that it is small in size and suitable for occasions without high-precision indexing.

L-handle Cam action indexing plungers

Thread: AISI303 Stainless steel Pin head: refined turning and plating town AISI303 stainless steel. It is recommended to fit with holes conforming to H7 tolerance. Lock nut: AISI304 stainless steel Handle: AISI316LHC Stainless steel Rubber sleeve: High elastic polyamide based (PA) high-tech polymer, black, matt finish. Resistant to solvents, oil, grease and other chemical solvents Standard model: Ms1120: (default)no rubber sleeve, with lock nut Ms1121: Nut with rubber sleeve and locking circuit Feature application: MS1120-SS handle indexing pin is suitable for occasio

Coarse Tooth Indexing Plungers

Thread body: Galvanized steel Pin head: AISI303 Stainless steel, recommended to be installed in the hole tolerance +0.03/+0.08 Lock nuts: Galvanized steel Knurled: High elastic PA high tech polymer, black, matte finish, solvent resistant, oil, grease and other chemical solvents Standard model: Type B with pinch hand BK type with belt pinch and lock nut Feature application: MS2170 indexing plunger is suitable for situations requiring positioning operation. MS2170-ST is a relatively low cost of the indexing plunger series, its outstanding advantage lies in the size of small, suitable for t

Plate-Mount Retractable Indexing Plungers

Indexing pin with flange Flange body: die cast zinc alloy galvanized, with two holes for installing countersunk screws Pin head: steel with black surface treatment and pin head with hardening treatment. It is recommended to fit with holes conforming to H7 tolerance. Knurled handle: high elastic polyamide based (PA) high-tech polymer with black matt finish. Resistant to solvents, oil, grease and other chemical solvents. Application: MS1080 indexing pin is compact in size and can be used for sheet metal installation

Coarse Tooth Indexing Plungers With Rest Position 1

Model MS2171-ST pin with fixed stop applies where positioning is required and where the pin head needs to be locked in retracted position MS2171-ST is a relatively inexpensive distribution system with a prominent advantage of compact size.Suitable for applications without high-precision indexing. Due to the compact size of the type MS2171-5T indexing pin, it is recommended that the maximum tightening torque listed in the table above be observed during assembly.